Technical Reports

2016    back to top

Palmtag, S.MPACT Library Verification by Comparison of Assembly Calculations to Monte Carlo Results, CASL-U-2016-1052-000, March 31, 2016.

Khuwaileh, B.A., Turinsky, P.J., Data Assimilation and Uncertainty Quantification Using VERA-CS for a Core Wide LWR Problem with Depletion, CASL Technical Report: CASL-U-2016-1054-000, March 23, 2016.

Palmtag, S.Investigation of Thermal Expansion Effects in MPACT, CASL-U-2016-1015-000, February 28, 2016.

Palmtag, S.MPACT Library Verification by Comparison of Pincell Calculations to Monte Carlo Results, CASL Technical Report: CASL-U-2015-0281-001, July 14, 2015.

Salko, R., Wysocki, A., Collins, B.S., Godfrey, A.T., Gosdin, C., Avramova, M., Development and Testing of CTF to Support Modeling of BWR Operating Conditions, CASL Technical Report: CASL-U-2016-1030-000, January 20, 2016.

2015    back to top

Capps, N., Liu, W., Montgomery, R., Pytel, M., Rashid, J., Spencer, B., Sunderland, D., Williamson, R., Wirth, B.D., Demonstrate 3D PCI analysis with BISONCASL for PCI fuel failure in a commercial power reactor, CASL Technical Report: CASL-U-2015-1016-000, September 30, 2015.

Salazar, D., Franceschini, F., VERA Modeling and Simulation of the AP1000 PWR Cycle 1 Depletion, CASL Technical Report: CASL-U-2015-0302-000, September 30, 2015.

Coyle, C., Phillips, B., Lowder, S., Buongiorno, J., McKrell, T., Synthesis of CRUD and its Effects on Pool and Subcooled Flow Boiling, CASL Technical Report: CASL-U-2015-0319-000, September 30, 2015.

Nadiga, B.T., M. Berndt and A. Bauer, Document the Progress Made on Developing Multi-Phase Capabilities in Hydra-TH (LA-UR-15-26503 Version 2), CASL Technical Report: CASL-U-2015-0296-000, August 18, 2015.

Kochunas, B., D. Jabaay, A. Fitzgerald and T. Downar, Initial BWR Modeling Capability for MPACT - (FY15.CASL.006), CASL Technical Report: CASL-U-2015-0265-000, July 31, 2015.

Godfrey, A.T., B.S. Collins, K.S. Kim, R. Lee, J. Powers, R. Salko, S.G. Stimpson, W.A. Wieselquist, R. Montgomery, R. Montgomery, B. Kochunas, D.R. Jabaay, N. Capps and J. Secker, VERA Benchmarking Results For Watts Bar Nuclear Plant, CASL Technical Report: CASL-U-2015-0206-000, June 26, 2015.

Keady, K.P., and E.W. Larsen, Stability of Monte Carlo k-Eigenvalue Simulations with CMFD Feedback, CASL Technical Report: CASL-U-2015-0223-000, May 28, 2015.

Keady, K.P., and E.W. Larsen, Stability of SN K=Eigenvalue Iterations using CMFD Acceleration, CASL Technical Report: CASL-U-2015-0224-000, May 28, 2015.

Stimpson, S.G., An Azimuthal, Fourier Moment-Based Axial SN Solver for the 2D/1D Scheme, CASL Technical Report: CASL-U-2015-0149-000, May 19, 2015.

Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.2 Theory Manual, CASL Technical Report: CASL-U-2015-0090-000, May 8, 2015.

Capps, N., B.D. Wirth, R. Montgomery, D. Sunderland, B. Spencer and M. Pytel, Evaluation of Missing Pellet Surface Geometry on Cladding Stress Distribution and Magnitude, CASL Technical Report: CASL-U-2015-0189-000, May 1, 2015.

Downar, T., B. Kochunas and B. Collins, MPACT Verification and Validation: Status and Plans, CASL Technical Report: CASL-U-2015-0134-000, April 30, 2015.

Kulesza, J.A., S.G. Stimpson, A.R. Gerlach and D.R. Jabaay, Babcock & Wilcox Critical Experiment Calculations to Support MPACT Verification, CASL Technical Report: CASL-U-2015-0143-000, April 24, 2015.

Coyle, C., J. Buongiorno and T. McKrell, Synthesis of CRUD and its Effects On Pool and Subcooled Flow Boiling - CASL L3 Milestone Report, CASL Technical Report: CASL-U-2015-0068-000, March 31, 2015.

Fang, J., I.A. Bolotnov, J. Lu and G. Tryggvason, L3:THM.CLS.P11.01 Interim Report: ITM/DNS for High Volume Fraction Bubbly Flow Regimes, Machine Learning for Closure Support, CASL Technical Report: CASL-U-2015-0095-000, March 31, 2015.

Forget, B., C. Josey, P. Ducru and J. Walsh, Progress on the Implementation and Testing of On-The-Fly Doppler Broadening for Monte Carlo Simulations, CASL Technical Report: CASL-U-2015-0160-000, March 31, 2015.

Liu, Y., and W. Martin, Implementation and Preliminary Verification of the Quasi-1D Kernel for Intra-pin Resonance Physics in MPACT, CASL Technical Report: CASL-U-2015-0116-000, March 16, 2015.

Palmtag, S., Initial Boiling Water Reactor (BWR) Input Specifications, CASL Technical Report: CASL-U-2015-0040-000, February 28, 2015.

Palmtag, S., and A. Godfrey, User Manual for the VERA Input Processor, CASL Technical Report: CASL-U-2014-0014-002, February 28, 2015.

Kochunas, B., D. Jabaay and T. Downar, VERA Problem 10: Restart and Shuffling in MPACT, Revision 1, CASL Technical Report: CASL-U-2014-0231-001, February 26, 2015.

Gurecky, W., and E. Schneider, MCNPX Simulations of WBNP Unit 1 with Keno Comparisons, CASL Technical Report: CASL-U-2015-0221-000, February 20, 2015.

Williamson, R., Contact Memory Report CASL.FY14, CASL Technical Report: CASL-U-2015-0021-000, January 30, 2015.

2014    back to top

Evans, T.M., and S. Hamilton, Efficient Solution of the Simplified PN Equations, CASL Technical Report: CASL-U-2014-0352-000, December 29, 2014.

Clarno, K.T., and R.P. Pawlowski, Incorporate MPACT into TIAMAT and Demonstrate Pellet-Clad Interaction (PCI) Calculations, CASL Technical Report: CASL-U-2015-0022-000, December 16, 2014.

Blyth, T.S., Improvement of COBRA-TF Subchannel Thermal-Hydraulics Code (CTF) using Computational Fluid Dynamics, CASL Technical Report CASL-U-2015-0020-000, December 15, 2014.

Torres-Tan, S.A., Coupled Fluid Structure Simulations for Application to Grid-to-Rod Fretting, December 15, 2014.

Walker, E.D., Modeling Integral Fuel Burnable Absorbers Using the Method of Characteristics, CASL Technical Report: CASL-U-2015-0015-000, December 1, 2014.

Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 Reference Manual, CASL Technical Report: CASL-U-2015-0089-000, November 7, 2014.

Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 Theory Manual, CASL Technical Report: CASL-U-2015-0090-000, November 7, 2014.

Adams, B.M., M.S. Ebeida, M.S. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, K.T. Hu, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 User’s Manual, CASL Technical Report: CASL_U-2015-0087-000, November 7, 2014.

Adams, B.M., M.S. Ebeida, W. Eldred, J.D. Jakeman, L.P. Swiler, J.A. Stephens, D.M. Vigil, T.M. Wildey, W.J. Bohnhoff, K.R. Dalbey, J.P. Eddy, K.T. Hu, L.E. Bauman and P.D. Hough, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 6.1 Developers Manual, CASL Technical Report: CASL-U-2015-0088-000, November 7, 2014.

Stagg, A.K., M.A. Christon and K. Frick, Native Conjugate Heat Transfer (CHT), CASL Technical Report CASL-U-2014-0214-000, October 22, 2014.

Godfrey, A., VERA-CS Validation Activities Matrix, CASL Technical Report: CASL-U-2014-0185-000-b, October 21, 2014.

Godfrey, A., VERA-CS Validation Plan, CASL Technical Report: CASL-U-2014-0185-000, October 21, 2014.

Stanek, C., Atomistically Informed Model of Thermal and Irradiation Creep in Zirconium (LA-UR-14-27758), CASL Technical Report: CASL-U-2011-0177-000, October 6, 2014.

Stanek, C.R., C. Tome, R. Montgomery and W. Liu, Demonstration of Atomistically-­informed Multiscale Zr Alloy Deformation Models in Peregrine for Normal and Accident Scenarios, CASL Technical Report: CASL-U-2014-0201-000 (LA-UR-14-27758), October 6, 2014.

Stanek, C.R., C. Tome, R. Montgomery and W. Lui, Demonstration of Atomistically-informed Multiscale Zr Alloy Deformation Models in Peregrine for Normal and Accident Scenarios (LA-UR-14-27758), CASL Technical Report: CASL-U-2014-0201-000, October 6, 2014.

Allison, L., R.C. Smith and B. Williams, An Information Theoretic Approach to Use High-Fidelity Codes to Calibrate Low-Fidelity Codes, CASL Technical Report: CASL-U-2014-0197-000, September 30, 2014.

Hassan, Y.A., Full-Field Measurements of Turbulent Bubby Flow using Innovative Experimental Techniques, CASL Technical Report CASL-U-2014-0209-000, September 30, 2014.

Hess, S., D. Hussey, B.T. Mervin, M. Pytel, R. Montgomery and F. Franceschini, Update to Industry Test Stand Experience Using VERA, CASL Technical Report CASL-U-2014-0187-000, September 30, 2014.

Hess, S., D. Hussey, B.T. Mervin, M. Pytel, R. Montgomery and F. Franceschini, Update to Industry Test Stand Experience Using VERA, CASL Technical Report: CASL-U-2014-0187-000, September 30, 2014.

Liu, Y., M. Srivastava and N. Dinh, Micro-hydrodynamics in High Heat Flux Boiling and Burnout: Experimental Data and Model Development, CASL Technical Report: CASL-U-2014-0211-000, September 30, 2014.

Lu, J., and G. Tryggvason, Transient Evolution and Dispersion of Bubbles in a Channel and Data Mining, CASL Technical Report: CASL-U-2014-0208-000, September 30, 2014.

Mousseau, V., N. Belcourt, R. Salko, K. Ivanov, M. Avramova and M. Doster, Cobra-TF Parameter Exposure Work, CASL Technical Report: CASL-U-2014-0198-000, September 30, 2014.

Salko, R., Development of CTF Capability for Modeling Reactor Operating Cycles with Crud Growth, CASL Technical Report: CASL-U-2014-0188-000, September 30, 2014.

Thomas, D., and G. Swindlehurst, Implementation of the Transient Capability in MPACT: Phase II, CASL Technical Report: CASL-U-2014-0186-000, September 30, 2014.

Xia, Y., and H. Luo, Single/Multiphase CFD Assessment, Verification, and Validation, CASL Technical Report: CASL-U-2014-0210-000, September 30, 2014.

Smith, T., and M.A. Christon, Enhanced Turbulence Model Capabilities in Hydra-TH, CASL Technical Report CASL-U-2014-0194-000, September 26, 2014.

Spencer, B.W., J.D. Hales, D.R. Gaston, D.A. Karpeev, R.L. Williamson, S.R. Novascon, D.M. Perez, R.J. Gardner and K.A. Gamble, BISON Contact Improvements CASL FY14 Report, CASL Technical Report: CASL-U-2014-0213-000 (INL/EXT-14-33285), September 20, 2014.

Podowski, M., RPI Milestone: Development of a Mechanistic Subcooled Boiling Model for PWR Assemblies, CASL Technical Report: CASL-U-2015-0113-000, August 31, 2014.

Baglietto, E., and M.A. Christon, Single Phase Validation of Hydra-TH for Fuel Applications, CASL Technical Report CASL-U-2014-0154-000, August 30, 2014.

Becker, T., A.V. Struggles and S. Pannala, Integrated Lift- and Wall-Force Closures in Computational Fluid Dynamics (CMFD), CASL Technical Report: CASL-U-2014-0170-000, August 29, 2014.

Godfrey, A., VERA Core Physics Benchmark Progression Problem Specifications, Revision 4, CASL Technical Report: CASL-U-2012-0131-004, August 29, 2014.

Winfrey, L., CASL Summer Workshop Report 2014, CASL Technical Report: CASL-U-2014-0166-000, August 28, 2014.

Salko, R., T.S. Blyth, J. Mageganz and M.N. Avramova, Coolant-Boiling in Rod Arrays - Two Fluids (CTF) Validation, CASL Technical Report CASL-U-2014-0169-000, August 20, 2014.

Collins, B., A. Graham, A. Zhu, B. Kochunas and T. Downar, Demonstration of Full Core Reactor Depletion with MPACT, CASL Technical Report: CASL-U-2014-0140-000, August 10, 2014.

Liu, Y., W. Martin, M. Williams and K.S. Kim, Resonance Self-shielding Method for Fuel Annular Subdivisions Using Quasi-1D Slowing-down Solution, CASL Technical Report CASL-U-2014-0123-000-a, August 2, 2014.

Liu, Y., W. Martin and K.S. Kim, Resonance Self-shielding Method for Fuel Annular Subdivisions Using Quasi-1D Slowing-down Solution, CASL Technical Report CASL-U-2014-0123-000-a, August 2, 2014.

Carpenter, J., N. Belcourt and R. Nourgaliev, General purpose steam table library : CASL L3:THM.CFD.P7.04 milestone report, SAND2013-SAND7328 473787, August 1, 2014.

Mervin, B., M. Pytel, D. Hussey and S. Hess, EPRI Test Stand Report: Results and Feedback from the EPRI Test Stand, CASL Technical Report: CASL-U-2014-0121-000-a, August 1, 2014.

Hamilton, S., M.A. Berrilla, K.T. Clarno and R.P. Pawlowski, An Assessment of Coupling Algorithms for Nuclear Reactor Core Physics Simulations, CASL Technical Report: CASL-U-2014-0149-000-b, July 31, 2014.

Slattery, S.R., Mesh-Free Data Transfer Algorithms for Partitioned Multiphysics Problems: Conservation, Accuracy, and Parallelism, CASL Technical Report: CASL-U-2014-0128-000, July 31, 2014.

Kothe, D., CASL Round Table Meeting, CASL Technical Report CASL-U-2014-0116-000, July 14, 2014.

Kochunas, B., W.A. Wieselquist, A. Zhu and K.S. Kim, ORIGEN Integration into MPACT, CASL Technical Report: CASL-U-2014-0114-000, July 4, 2014.

Gilman, L., Development of a General Purpose Subgrid Wall Boiling Model from Improved Physical Understanding for Use in Computational Fluid Dynamics, CASL Technical Report: CASL-U-2014-0205-000, June 30, 2014.

Kenner, K., Modeling an iPWR Startup Core Cycle with VERA, CASL Technical Report: CASL-U-2014-0069-001, June 26, 2014.

Sly, N.C., Verification of the Shift Monte Carlo Code Using the C5G7 and CASL Benchmark Problems, CASL Technical Report: CASL-U-2014-0142-000, May 30, 2014.

Noordhoek, M.J., T. Liang, T. Chiang, S.B. Sinnott and S.R. Phillpot, Mechanisms of Zr Surface Corrosion Determined via Molecular Dynamics Simulations with Charge-Optimized Many-Body (COMB) Potentials, CASL Tecnnical Report CASL-U-2014-0217-000, May 14, 2014.

Hayrapetian, A.V., and M.J. Demkowicz, Microscale Model for Simulating Fretting Wear of Brittle Materials with Third-body Wear Debris Interaction, CASL Technical Report CASL-U-2014-0139-000, May 8, 2014.

Godfrey, A., S. Palmtag, G. Davidson and B. Collins, VERAOUT - VERA HDF5 Output Specification, CASL Technical Report CASL-U-2014-0043-001, May 2, 2014.

Berrilla, M.A., K.T. Clarno and S.P. Hamilton, Evaluation of Coupling Approaches, CASL Technical Report: CASL-U-2014-0081-000, May 1, 2014.

Murphy, S., E. Jay and R.W. Grimes, Pipe Diffusion at Dislocations in UO2, CASL-U-2014-0126-000, May 1, 2014.

Bartlett, R., Generic TriBITS PRoject, Build, Test, and Install Quick Reference Guide, CASL Technical Report: CASL-U-2014-0075-000-a, March 31, 2014.

Bartlett, R., TriBITS Develops Guide and Reference, CASL Technical Report: CASL-U-2014-0075-b, March 31, 2014.

Godfrey, A., MPACT Testing and Benchmarking Results, CASL Technical Report: CASL-U-2014-0045-000, March 31, 2014.

Yixing, S., J. Yan, C. Liping, V. Kucukboyaci, E. Tatli, M.A. Christon, R. Salko and H. Zhang, Assessment of Multi-Scale Thermal-Hydraulic Codes and Models for DNB Challenge Problem Applications, CASL Technical Report: CASL-U-2014-0032-000, March 31, 2014.

Adams, B., R. Hooper, R.C. Smith and B. Williams, VUQ Milestone Review: User Guidelines and Best Practices for CASL VUQ Analysis Using Dakota, CASL Technical Report: CASL-U-2014-0038-000-b, March 28, 2014.

Williams, B.J., L.P. Swiler, R. Hooper, A. Lewis, J.A. McMahan, R.C. Smith and B.M. Adams, User Guidelines and Best Practices for CASL VUQ Analysis Using Dakota, CASL Technical Report: CASL-U-2014-0038-000 (SAND2014-SAND2864 517358), March 28, 2014.

Franceschini, F., A. Godfrey, J. Kulesza and R. Oelrich, Westinghouse VERA Test Stand - Zero Power Physics Test Simulations for the AP1000 PWR, CASL Technical Report: CASL-U-2014-0012-001, March 2014.

Jin, M., and M. Short, Two-Phase Fluid Flow Modeling in CRUD using MAMBA-BDM, CASL Technical Report CASL-U-2014-0143-000, February 17, 2014.

2013    back to top

Tamang, A., A Multilevel Method for Solving Neutron Kinetics Equations Coupled with the Heat Transfer Equation, December 31, 2013.

Palmtag, S., Demonstration and Neutronics Coupled to Thermal-Hydraulics for a Full-Core Problem using VERA, CASL Technical Report: CASL-U-2013-0196-000, December 30, 2013.

Baglietto, E., and M. Christon, Demonstration & Assessment of Advanced Modeling Capabilities to Multiphase Flow with Sub-Cooled Boiling, CASL Technical Report: CASL-U-2013-0181-001, December 23, 2013.

Evans, T.M., F. Franceschini, A. Godfrey, S. Hamilton, W. Joubert and J. Turner, High-Fidelity Neutronic Analysis of the Westinghouse AP1000, CASL Technical Report: CASL-U-2013-0231-000, December 4, 2013.

Collins, B., S. Stimpson, B. Kochunas and T. Downar, Application of MPACT 2D/1D to AMA Benchmark Problem 5, CASL Technical Report: CASL-U-2013-0273-000, November 30, 2013.

Kochunas, B., D. Jabaay, B. Collins and T. Downar, Coupled Single Assembly Solution with COBRA-TF/MPACT (Problem 6), CASL Technical Report: CASL-U-2013-0280-000, November 30, 2013.

Asher, I., and K. Fidkowski, A Study of the Role of Adjoint-Equipped CFD in VUQ Analysis of Channel Boiling Simulations, CASL Technical Report: CASL-U-2013-0192-000, November 21, 2013.

Lu, J., and G. Tryggvason, Transient Evolution of Bubbles in a Channel, CASL Technical Report: CASL-U-2014-0040-000, November 20, 2013.

Sieger, M., VERA Release Notes ID: 2013 VERA RSICC Release (VERA 3.2), CASL Technical Report: CASL-U-2014-0172-000, November 16, 2013.

Romano, P., and B. Forget, Tally Server Implementation in OpenMC, CASL Technical Report: CASL-2013-0215-000, October 24, 2013.

O’Brien, C., Z. Rak and D. Brenner, Free Energies of (Co, Fe, Ni, Zn) Fe2O4 Spinels and Oxides in Water at High Temperatures and Pressure from Density Functional Theory: Results for Stoichiometric NiO and NiFe2O4 Surfaces, CASL Technical Report: CASL-I- 2014-0184-000-a, October 8, 2013.

Abdel-Khalik, H.S., R. Smith and C. Webster, Development of Hybrid Order Reduction Methods for Uncertainty Quantification, CASL Technical Report: CASL-U-2014-0028-000, September 30, 2013.

Crane, N.K., Modal Dynamics Analysis Demo with Sierra, CASL Technical Report CASL-U-2013-0283-000, September 30, 2013.

Dinh, N., Validation Data Needs Survey, CASL Technical Report: CASL-U-2013-0194-001, September 30, 2013.

Doster, M., Assessment of the Performance of COBRA-TF for the Prediction of Subcooled Boiling Conditions in Rod Bundles, CASL Technical Report: CASL-U-2013-0201-000, September 30, 2013.

Godfrey, A., RSICC Release Testing Results Summary, CASL Technical Report: CASL-U-2014-0009-000, September 30, 2013.

Hassan, Y., Experimental Investigation of Subcooled Flow Boiling, CASL Technical Report: CASL-U-2013-0214-000, September 30, 2013.

Kendrick, B., V. Petrov, D. Walter and A. Manera, CILC Studies with Comparative Analysis to Existing Plants, CASL Technical Report: CASL-U-2013-0224-000, September 30, 2013.

Petrov, V., and A. Manera, Implementation and Validation of the New RPI Boiling Models Using STAR-CCM+ as CFD Platform, CASL Technical Report: CASL-U-2013-0193-000, September 30, 2013.

Samaroo, R., M. Kawaji, T. Yabuki and N. Osamu, MEMS Sensor Measurement of Surface Temperature Response during Subcooled Flow Boiling in a Rectangular Flow Channel, CASL Technical Report: CASL-U-2013-0211-000, September 30, 2013.

Smith, T., J. Shadid, R. Pawlowski, E. Cyr and T. Wildey, Thermal Hydraulic Simulations, Error Estimation and Parameter Sensitivity Studies in Drekar::CFD, CASL Technical Report: CASL-U-2013-0203-001, September 30, 2013.

Williams, B., L. Pritchett-Sheats, K. Copps, L. Swiler and E. Prudencio, Separate Effects V&V for Hydra-TH, CASL Technical Report: CASL-U-2013-0213-000, September 30, 2013.

Xia, Y., H. Luo, J. Bakosi, M. Christon and L. Pritchett-Sheats, Hydra-TH Milestone Report, CASL Technical Report: CASL-U-2013-0198-000, September 30, 2013.

Bakosi, J., M. Christon, L. Pritchett-Sheats, H. Lou, Y. Xia and R. Nourgaliev, Hydra-TH Verification, Validation and Thermal-Hydraulics Benchmark Problems, CASL Technical Report: CASL-U-2013-0209-000, September 16, 2013.

Abdel-Khalik, H., J. Hite, R. Smith, M. Wentworth, E. Prudencio and B. Williams, Uncertainty Quantification and Data Assimilation (UQ/DA) Study on a VERA Core Simulator Component for CRUD Analysis, CASL-U-2013-0184-000, August 30, 2013.

Carpenter, J., N. Belcourt and R.R. Nourgaliev, General Purpose Steam Table Library, CASL Technical Report CASL-U-2013-0188-000, August 30, 2013.

Gilman, L., and E. Baglietto, Advancements on Wall Boiling Modeling in CFD: Leveraging New Understanding From MIT Flow Boiling Facility, CASL Technical Report: CASL-U-2013-0185-000, August 30, 2013.

Podowski, M., RPI L3 Milestone Report: Summary of Milestone Accomplishments and Lessons Learned, CASL Technical Report: CASL-U-2013-0204-000, August 30, 2013.

Gehin, J., A. Godfrey, F. Franceschini, T. Evans, B. Collins and S. Hamilton, Operational Reactor Model Demonstration with VERA: Watts Bar Unit 1 Cycle 1 Zero Power Physics Test, CASL Technical Report: CASL-U-2013-0105-001, August 23, 2013.

Pawlowski, R.P., J. Turner, S. Palmtag and R. Montgomery, Initial Demonstration of Peregrine in VERA-CS, CASL Technical Report: CASL-U-2013-0165-000, July 31, 2013.

Palmtag, S., Coupled Single Assembly Solution with VERA (Problems 6), Revision 1, CASL Technical Report: CASL-U-2013-0150-001, July 25, 2013.

Turner, J., Virtual Environment for Reactor Applications (VERA): Snapshot 3.1, CASL Technical Report: CASL-U-2013-0164-000, July 24, 2013.

Andersson, D.A., and C.R. Stanek, Mixing and Non-Stoichiometry in Fe-Ni-Cr-Zn-O Spinel Compounds: Density Functional Theory Calculations, CASL Technical Report: CASL-U-2013-0145-000, July 22, 2013.

Alankar, A., and C. Tome, Development of a Plastic Deformation Model of Irradiated Zircaloy for Addressing LOCA Conditions, Los Alamos National Laboratory Internal Report (LA-UR-13-25085), July 13, 2013.

Abdel-Khalik, H.S., R.C. Smith and C. Websters, Multi-physics UQ Hybridization Framework Development, CASL Technical Report: CASL-U-2014-0028-000-a, July 11, 2013.

Bessmann, T., Implementation of More Complete Thermochemical Database in MAMBA, CASL Technical Report: CASL-U-2013-0121-000, June 28, 2013.

Fang, J., J. Lu, A. Thomas, I. Bolotnov and G. Tryggvason, ITM/DNS Database of Drag, Lift and Wall Effects, Including the Effects of Void Fractions, CASL Technical Report: CASL-U-2013-0062-001, June 26, 2013.

Godfrey, A., Westinghouse Test Stand Technical Readiness Review, CASL Technical Report: CASL-U-2013-0117-000-a, June 25, 2013.

Nourgaliev, R., M. Christon, J. Bakosi and A. Bui, Newton-Krylov Based P2 Projection Solver for Fluid Flows, INL/EXT-13-28278, June 17, 2013.

Guion, A., G. Rabello, C. Narayanan and J. Buongiorno, Closure Relation for Microlayer Evaporation in Nucleate Boiling, and its Application to ITM Test Case 3b, CASL Technical Report: CASL-U-2013-0140-000, June 1, 2013.

Sunny, E.E., On-the-Fly Generation of Differential Resonance Scattering Probability Distribution Functions for Monte Carlo Codes, May 5, 2013.

Hess, S., and R. Montgomery, VERA Release Plan Revision 1, CASL Technical Report: CASL-U-2013-0146-000, April 26, 2013.

Yan, F., Fibrous Debris Pilot Simulation, Technical Report: FFT-13-34, April 16, 2013.

Evans, T.M., Evaluating the Denovo SPN Discretization, CASL Technical Report CASL-U-2014-0083-000, April 5, 2013.

Evans, T.M., Evaluating the Denovo SPN Discretization, Rev. 1, CASL Technical Report: CASL-U-2014-0083-000, April 5, 2013.

Carpenter, J., and N. Belcourt, Tabular Water Properties Interface for Hydra-TH: CASL THM.CFD.P6.03, CASL Technical Report: CASL-U-2013-0087-000 (SAND2013-SAND2697 463468), April 1, 2013.

Mousseau, V., B. Adams, K. Ivanov, M. Avramova, R. Salko and T. Blyth, Apply VUQ Practices with Dakota to COBRA-TF for AMA-Relevant Problems, SAND2013-SAND3093, April 1, 2013.

Larsen, E., Assessment of Improved Axial Scheme vs Baseline 2D/1D, CASL Technical Report: CASL-U-2013-0046-000, March 31, 2013.

Wildey, T., E. Cyr, J. Shadid, R. Pawlowski and T. Smith, A Comparison of Adjoint and Data-Centric Verification Techniques, CASL Technical Report: CASL-U-2013-0223-000, March 31, 2013.

Turner, J., R. Summers and S. Palmtag, Virtual Environment for Reactor Applications (VERA), CASL Technical Report: CASL-U-2014-0006-000, March 29, 2013.

Bakosi, J., M.A. Christon, L. or. Pritchett-Sheats, H. Luo, T. Xia and R. Nourgaliev, Hydra-TH Verification, Validation and Thermal-Hydraulics Benchmark Problems (LA-UR-13-22017), CASL Technical Report: CASL-U-2013-0324-000-b, March 28, 2013.

Bui, A., and N. Dinh, Quantification of Data Needs, Data Collection and Characterization to Support Validation and Calibration of Subcooled Flow Boiling Model, INL/EXT-13-28709, March 28, 2013.

Jokisaari, A.M., and K. Thornton, Demonstration of Hyrax Capabilities, CASL Technical Report: CASL-U-2013-0346-000, March 28, 2013.

Xia, Y., and H. Luo, Hydra-TH Milestone Report, CASL Technical Report CASL-U-2013-0324-000, March 28, 2013.

Pernice, M., and M. Sieger, Survey of Software Quality Assurance and Code Verification Practices in CASL, CASL Technical Report: CASL-U-2013-0079-000, INL/EXT-13-28675, March 26, 2013.

Bakosi, J., M.A. Christon and R.R. Nourgaliev, Newton-Krylov based P2 Projection Solver for Fluid Flows, CASL Technical Report: CASL-U-2013-0288-000-b, February 12, 2013.

Bakosi, J., M.A. Christon, L. Pritchett-Sheats and R.R. Nourgaliev, Hydra-TH Advanced Capabilities, CASL Technical Report CASL-U-2013-0288-000, February 1, 2013.

2012    back to top

Godfrey, A., F. Franceschini, S. Palmtag and J. Stout, Analysis of Two-Dimensional Lattice Physics Verification Problems with MPACT, CASL Technical Report: CASL-U-2012-0172-000, December 21, 2012.

Salko, R., M. Avramova, R. Schmidt, S. Palmtag and R. Hooper, Suggestions for COBRA-TF Parallelization and Optimization, CASL Technical Report: CASL-U-2013-0003-000, December 21, 2012.

Bakosi, J., M.A. Christon, L. or. Pritchett-Sheats, H. Luo, T. Xia and R.R. Nourgaliev, Hydra-TH Verification Problems, December 14, 2012.

Di, Y., Experimental Observations and Measurements of Pool Boiling Heat Transfer Using PIV and RICM Techniques, December 5, 2012.

Subramanian, G., D. Perez, B. Uberuaga, C. Tome and A. Voter, Progress Report on the Incorporation of Lower Lengthscales into Polycrystal Plasticity Models. Part II: LA-UR 12-25613, Los Alamos Report LA-UR 12-25613, November 30, 2012.

Subramanian, G., and C. Tome, Progress Report on the Incorporation of Lower Lengthscales into Polycrystal Plasticity Models. Part I: LA-UR 12-25612, Los Alamos Report LA-UR 12-25612, November 30, 2012.

Doster, M., and M. Thames, Grid Sensitivity Study of CFD versus COBRA, CASL Technical Report: CASL-U-2012-0171-000, November 27, 2012.

Martin, W., Implementation of On-the-Fly Doppler Broadening in MCNP5 for Multiphysics Simulation of Nuclear Reactors, Project No. 10-897, November 1, 2012.

Shadid, J., T. Smith, R. Pawlowski, E. Cyr and P. Weber, RANS CFD Simulations for CASL THM Using Drekar:: CFD, CASL Technical Report: CASL-U-2012-0164-000, October 31, 2012.

Bolotnov, I., Informing the Development of Multiphase CFD Models using Bubbly Turbulent Flow Interface Tracking Results, CASL Technical Report: CASL-U-2012-0156-000, September 30, 2012.

Bui, A., T.N. Dinh, R.R. Nourgaliev and R.W. Youngblood, Two-Phase Flow and Heat Transfer Model Calibration and Code Validation: A Subcooled Boiling Flow Case Study, CASL Technical Report: INL/CON-12-27859, September 30, 2012.

Wildey, T., E. Cyr, R. Pawlowski, J. Shadid and T. Smith, Adjoint Based a Posteriori Error Estimation in Drekar:: CFD, CASL Technical Report: CASL-U-2013-0178-000-a, Sandia Report SAND2012-SAND8910, September 30, 2012.

Young, M., J. Jarrell and T. Evans, Method of Characteristics Assisted Cross Section Homogenization for Denovo (Rev. 1), CASL Technical Report: CASL-U-2012-0159-000, RNSD-TN-12-0001, September 30, 2012.

Asher, I., T. Drzewiecki, T. Grunloh, V. Petrov, K. Fidkowski and A. Manera, Sensitivity, Verification, and Validation Studies of STAR-CD, STAR-CCM+, and Nphase CFD Boiling Models, CASL Technical Report: CASL-U-2012-0163-000, September 29, 2012.

Nourgaliev, R., M. Christon and J. Bakosi, Notes on Newton-Krylov based Incompressible Flow Projection Solver, CASL Technical Report: CASL-U-2012-0155-000, INL/EXT-12-27197, September 29, 2012.

Nourgaliev, R., M. Christon and J. Bakosi, Solution Algorithms for Multi-Fluid-Flow Averaged Equations, CASL-U-2012-0155-000-a, INL/EXT-12-27187, September 29, 2012.

Bui, A., and N. Dinh, Validation Data Plan Implementation: Subcooled Flow Boiling Case Study, CASL Technical Report: CASL-U-2012-0162-000, September 28, 2012.

Adams, B., M. Eldred, P. Hough and L. Swiler, DAKOTA Training: DAKOTA 101, Overview and Wrap-Up, Sandia National Laboratories Technical Report, SAND2012-SAND7388 P, September 1, 2012.

Adams, B.D., M. Eldred, P. Hough and L. Swiler, DAKOTA Training: DAKOTA 101, Optimization and Calibration, Sandia National Laboratories Technical Report, SAND2012-SAND7388 P, September 1, 2012.

Adams, B.D., M. Eldred, P. Hough and L. Swiler, DAKOTA Training: DAKOTA 101, Sensitivity Analysis and Uncertainty Quantification, Sandia National Laboratories Technical Report, SAND2012-SAND7387 P, September 1, 2012.

Adams, B., M.S. Eldred, P. Hough and L.P. Swiler, DAKOTA Training: Advanced Topics, September 1, 2012.

Rider, W., and J. Kamm, Advanced Solution Verification of CFD Solutions for LES of Relevance to GTRF Estimates, CASL Technical Report: CASL-U-2012-0132-000, August 31, 2012.

Christon, M.A., J. Bakosi and R.B. Lowrie, Hydra-TH User’s Manual, Version: LA-UR-12-23181, CASL Technical Report: CASL-U-2012-0075-000-b, July 19, 2012.

Eldred, M., and T. Wildey, Propagation of Model Form Uncertainty for Thermal Hydraulics using RANS Turbulence Models in Drekar, CASL Technical Report: CASL-U-2012-0080-000, June 30, 2012.

Bakosi, J., N. Barnett, M.A. Christon, M.M. Francois, R.B. Lowrie and R. Sankaran, Integration of Hydra-TH in VERA, CASL Technical Report CASL-U-2012-0075-000, June 22, 2012.

Barashev, A.V., S.I. Golubov and R.E. Stoller, Theoretical Investigation of Microstructure Evolution and Deformation of Zirconium under Cascade Damage Conditions, ORNL/TM-2012/225, June 22, 2012.

Barashev, V.A., I.S. Golubov and R.E. Stroller, Theoretical Investigation of Microstructure Evolution and Deformation of Zirconium under Neutron Irradiation, CASL Technical Report: CASL-U-2013-0208-000, June 1, 2012.

Samolyuk, G.D., S.I. Golubov, Y.N. Osetsky and R.E. Stoller, DFT Study Revises Interstitial Configurations in HCP Zr, ORNL/TM-2011/516, June 1, 2012.

Wirth, B., C.R. Stanek, R. Montgomery, R. Williamson, J. Hales, D.R. Gaston, R.C. Martineau, D. Sunderland, J. Rashid, B.K. Kendrick, M.P. Short, K. Edsinger and D. Hussey, High Fidelity Fuel Performance Model Development: Focus on Benchmark & Validation activities for PCI and CRUD, CASL Technical Report: CASL-U-2012-0054-000, April 2, 2012.

Caviezel, D., and D. Lakehal, TransAT Sensitivity Studies: From Laminar Flow Past Circular Cylinders to LES of Test Case 2, CASL report 2, ASCOMP Internal Report, TRS-V/1-2012, April 1, 2012.

Banta, J., CASL Enterprise Project Management (EPM) Tool, a Unified PM Platform, CASL Technical Report: CASL-U-2012-0052-000, March 31, 2012.

Davidson, G., Demonstrate Initial Deterministic Transport Capability through VERA-CS, CASL Technical Report: CASL-U-2012-0245-000, March 31, 2012.

Li, T., P. Nath, N.K. Crane and T.L. Sham, Enhancement of GTRF Modeling Fidelity, CASL Technical Report: CASL-U-2012-0237-000, March 31, 2012.

Yan, J., P. Yuan, Y. Xu, Z. Karoutas, E. Popov, S. Pannala, A.K. Stagg, S. Lucas, H. Zhang, R. Brewster, E. Baglietto, E. Dominguez-Ontiveros and Y.A. Hassan, Thermal Hydraulic Validation Report, CASL Technical Report: CASL-U-2012-0037-000, March 31, 2012.

Godfrey, A., Industry Council Workflow Project: Final Report, CASL Technical Report: CASL-U-2011-0236-002, March 30, 2012.

Hess, S., VERA Requirements Document (VRD) - Revision 1, CASL Technical Report: CASL-U-2011-0074-002, March 30, 2012.

Dinh, N., CRUD-Induced Power Shift (CIPS) Validation Data Plan (INL-EXT-12-253470, March 29, 2012.

Zhang, H., Review of Experiments for CASL Neutronics Validation, CASL Technical Report: CASL-U-2012-0039-000, March 29, 2012.

Jarrell, J., A. Godfrey, T. Evans and G. Davidson, Full Core Reactor Analysis: Running Denovo on Jaguar, CASL Technical Report: CASL-U-2012-0041-000, March 13, 2012.

Hess, S., Evaluation of Industry Council Pilot Project Alternatives, CASL Technical Report: CASL-U-2012-0026-000, February 29, 2012.

Chatzikyriakou, D., J. Buongiorno and C. Narayanan, Solution Verification Applied to TransAT Large Eddy Simulations for Smooth Wall Channel Flow With Periodic Boundary Conditions, Rev 1, CASL Technical Report: CASL-U-2011-0184-001, February 28, 2012.

Bolotnov, I., C. Estrada-Perez and Y. Hassan, ITM Simulations of Subcooled Flow Nucleate Boiling Experiment at TAMU, CASL Technical Report: CASL-U-2012-0012-000, January 31, 2012.

Zhang, H., Power Uprate Limitation Assessment, CASL Technical Report: CASL-U-2012-0011-000, January 31, 2012.

Gehin, J., S. Hess, Z. Karoutas and R. Montgomery, Proposed Test Stand Selection Criteria, CASL Technical Report: CASL-U-2012-0146-000, January 23, 2012.

Kendrick, B.K., D. Walter, B.S. Collins, V. Petrov, A. Manera and T. Downar, Proof-of-concept of DeCART/STAR-CCM+/MAMBA Coupled Simulation for the Prediction of Crud Deposition on a Fuel Pin with Grid Spacers, CASL Technical Report: CASL-U-2012-0045-000, January 20, 2012.

2011    back to top

Adams, B., Y. Sung and J. Secker, Sensitivity and Uncertainty Analysis for CIPS with VIPRE-W and BOA, CASL Technical Report: CASL-U-2011-0171-000, (SAND 2011-9445 TRN: US1201897), December 31, 2011.

Christon, M., J. Bakosi, N. Barnett., M. Francois and R. Lowrie, Initial Assessment of Hydra-TH on Grid-to-Rod Fretting Problems, CASL Technical Report: CASL-U-2011-0242-001, December 22, 2011.

Christon, M.A., J. Bakosi and R.B. Lowrie, Hydra-TH User’s Manual, CASL Technical Report: CASL-U-2012-0075-000-b (LA-UR-12-23181), December 1, 2011.

Adams, B., W. Bohnhoff, K. Dalbey, J. Eddy, M. Eldred, P. Hough, S. Lefantzi and L. Swiler, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 5.2 User’s Manual, SAND2010-SAND2183, Sandia National Laboratories SAND Report, November 30, 2011.

Golubov, S.I., A.V. Barashev and R.E. Stroller, On the Origin of Radiation Growth of HCP Crystals, ORNL Report: ORNL/TM-2011/473, November 1, 2011.

Copps, K., High-Order Quantitative Model Validation Metrics Integrating Experimental and Computational Data for Large-Scale Time-Independent Nonlinear Systems, CASL Technical Report: CASL-U-2011-0196-000-a, October 31, 2011.

Copps, K.D., Verification of the Coupled Fluid/Solid Transfer in a CASL Grid-to-Rod-Fretting Simulation : a technical brief on the analysis of convergence behavior and demonstration of software tools for verification., CASL Technical Report: CASL-U-2011-0196-000 (Sandia Report SAND2011-SAND9153), October 31, 2011.

Abdel-Khalik, H., Hybridization Framework for Uncertainty Quantification, Sensitivity Analysis, and Data Assimilation, CASL Technical Report: CASL-U-2011-0193-000, September 30, 2011.

Bartlett, R., LIME 2.0 Architecture and Design: Version 0.5 (Rev. 1), CASL Technical Report: CASL-U-2011-0167-000, September 30, 2011.

Bolotnov, I.A., ITM Benchmark #1: PHASTA Results, CASL Technical Report: CASL-U-2011-0185-000, September 30, 2011.

Eldred, M., Investigation of Advanced UQ for CRUD Prediction with VIPRE, CASL Technical Report: CASL-U-2011-0194-000, September 30, 2011.

Godfrey, A., VERA Core Physics Benchmark Progression Problem Specifications, Revision 4, CASL Technical Report: CASL-U-2012-0131-004, September 30, 2011.

Lowrie, R.B., M.A. Christon, N. Barnett, J. Bakosi and M.M. Francois, Hydra-TH L3 Milestone (L3:THM.CFD.P3.02), CASL Technical Report: CASL-U-2011-0183-000, September 30, 2011.

Stewart, J., CASL Uncertainty Quantification Roadmap, CASL Technical Report: CASL-U-2011-0195-000, September 30, 2011.

Turner, J., N. Belcourt, R. Hooper, R. Pawlowski and R. Schmidt, An Introduction to LIME1.0 and its Use in Coupling Codes for Multiphysics Simulations, CASL Technical Report: CASL-U-2011-0017-002, SAND2011-SAND8524, September 30, 2011.

Baker, C., R. Bartlett, K. Clarno, B. Collins, T. Evans, R. Pawlowski, R. Schmidt and J. Turner, Domain Model Specification for VERA: Version 1.0 (September 2011) (Rev 1), CASL Technical Report: CASL-U-2011-0169-000, September 11, 2011.

Kendrick, B.K., and M.P. Short, A 2D, High Resolution, Coupled Demonstration and Assessment of the Crud Challenge Problem, CASL Technical Report: CASL-U-2011-0175-000, August 26, 2011.

Lowrie, R.B., Summary of THM Meeting with EDF, CASL Technical Report CASL-U-2011-0281-000, August 24, 2011.

Kothe, D., CASL Round Table Meeting, CASL Technical Report CASL-U-2011-0072-000, August 9, 2011.

Rider, W., Solution Verification Applied to Drekar and Fuego Calculations using of Grid-to-Rod-Fretting (GTRF), CASL Technical Report: CASL-U-2011-0192-000, July 31, 2011.

Rosa, M., Advanced Transport Methods for Nuclear Reactor Simulations, Poster Presentation, Nuclear Engineering and Technology Capability Review at LANL, Los Alamos National Laboratory Report LA-UR-11-02783, July 27, 2011.

Cacuci, D., Best Estimate plus Reduced Uncertainties (BERU) Predications, CASL Technical Report: CASL-U-2011-0055.000, June 30, 2011.

Downar, T., B. Kochunas, R. Brewster and E. Baglietto, Full-core 3D MOC Transport (2D/1D, Pin-resolved) Capability with T-H Coupling, CASL Technical Report: CASL-U-2011-0075-000, June 30, 2011.

Rodriquiz, S., and D. Turner, Assessment of Existing Sierra/Fuego capabilities Related to Grid-to-Rod-Fretting (GTRF), CASL Technical Report: CASL-U-2011-0023-000, SAND-2012-0530, June 30, 2011.

Copps, K., Open Source the Percept Software and Demonstrate Verfiication of the Gred-to-Rod Fretting Problem, CASL Technical Report: CASL-U-2011-0019-000, June 20, 2011.

Tome, C.N., and T. Sham, Polycrystal Modeling of Irradiation and Thermal Creep of Cladding, LANL Internal Report, May 17, 2011.

Szilard, R., NEAMS VU and CASL VUQ: Strategic Goals, Priorities, and Leveraging Opportunities, CASL Technical Report: CASL-U-2011-0001-000, April 30, 2011.

Williams, B., B. Adams, Y. Sung and W. Witkowski, Demonstration of Validation Methodology Applied to VIPRE-W Boiling Index Calculations, Los Alamos National Laboratory Report LA-UR-11-02470, April 25, 2011.

Evans, T.M., 3D SN Transport, CASL Technical Report: CASL-U-2011-0018-000, April 6, 2011.

Tryggvason, G., R. Scardovelli and S. Zaleski, Direct Numerical Simulations of Gas-Liquid Multiphase Flows, April 1, 2011.

Adams, B.D., W. Witkowski and Y. Sung, Enable Statistical Sensitivity and UQ Demonstrations for VERA, CASL Technical Report: CASL-U-2011-0049-000, March 31, 2011.

Evans, T.M., G. Davidson and J. Jarrell, Design of a Neutronics Package for Multi-Physics Reactor Calculations (Rev. 1), CASL Technical Report: CASL-U-2011-0017-000-b, March 31, 2011.

Pawlowski, R., R. Bartlett, N. Belcourt, R. Hooper and R. Schmidt, A Theory Manual for Multi-physics Code Coupling in LIME, Version 1.0, Sandia National Laboratory Report, SAND 2011-2195, March 31, 2011.

Turner, J., T. Evans, G. Davidson and J. Jarrell, Design on Neutronics Package for Multi-Physics Reactor Calculations, CASL Technical Report: CASL-U-2011-0017-000-b, RNSD-TN-11-004, March 31, 2011.

Turner, J., CASL VERA SQA Plan, CASL Technical Report: CASL-U-2011-0017-000-d, March 31, 2011.

Turner, J., R. Schmidt, R. Bartlett, N. Belcourt, R. Hooper and R. Pawlowski, A Theory Manual for Multi-Physics Code Coupling in LIME, CASL Technical Report: CASL-U-2011-0017-000, SAND2011-SAND2195, March 31, 2011.

Dinh, N., CASL Validation Data: An Initial Review, CASL Technical Report: CASL-U-2011-0020-000, INL Publication, INL/EXT-11-21017, January 31, 2011.

Adams, B., W. Bohnhoff, K. Dalbey, J. Eddy, M. Eldred, P. Hough, S. Lefantzi and L. Swiler, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 5.2 Reference Manual, SAND2011-SAND9106, Sandia National Laboratories SAND Report, January 26, 2011.

Adams, B., W. Bohnhoff, K. Dalbey, J. Eddy, M. Eldred, P. Hough, S. Lefantzi and L. Swiler, DAKOTA: A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis: Version 5.2 Theory Manual, SAND2011-SAND9106, Sandia National Laboratories SAND Report, January 26, 2011.

2010    back to top

Rider, W., Verification, Validation and Uncertainty Quantification Workflow in CASL, CASL Technical Report: CASL-U-2010-0023-000, SAND Report SAND2010-SAND2234P, December 30, 2010.

Rider, W., Verification, Validation and Uncertainty Quantification Workflow in CASL, CASL Technical Report: CASL-U-2010-0023-000, SAND Report SAND2010-SAND2234P, December 30, 2010.

Rider, W., J. Kamm and G. Weirs, Code Verification Workflow in CASL, CASL Technical Report: CASL-U-2010-0023-000-a, SAND Report SAND2010-SAND7060P, December 30, 2010.

Rider, W., and J. Kamm, Procedures for Calculation Verification, CASL Technical Report: CASL-U-2010-0023-000-b, December 30, 2010.

Berry, R., Some Specific CASL Requirements for Advanced Multiphase Flow Simulation of Light Water Reactors, INL/EXT-10-20529, November 30, 2010.

Schmidt, R., Introduction to LIME: A Lightweight Integrating Multi-physics Environment for Coupling Codes, CASL Technical Report: CASL-U-2010-0006-000, October 29, 2010.